Torque wrench with individual fixed settings

With fixed setting or conventionally usable.

MANOSKOP® 730 Fix - The torque wrench can be used variably. On the one hand, this can be used as a “conventional” torque wrench (adjusting screw remains in the torque wrench) or an individual fixed setting (on site by the user) is made. To do this, the adjusting screw is removed and, after the torque value has been set, a supplied locking screw and an adhesive seal are attached. These measures protect against manipulation - the torque value can no longer be adjusted undetected. With integrated left and right turn. Delivery including storage box.

Long service life

No need to reset to "0" thanks to the release system with switching edge. The measuring element is only loaded when it is tightened.

Intuitiv

With an audible click and a noticeable double stop signal when the specified setting value is reached.

Extensive

Delivery incl. TORX® TAMPER-RESISTANT locking screw and adhesive seal sheet. For security from the first use.

Adjustment knob can be screwed out

Adjustment button can be unscrewed after setting the release torque - an unintentional change of the target torque is prevented.

Safety screw protects against manipulation

The supplied TORX® TAMPER-RESISTANT locking screw also protects against manipulation.

No adjustment without breaking the seal

As well as the enclosed adhesive seals. No pretense possible without breaking the seal.