In the field of industrial hydraulics, it is often the case that complete systems are used in accordance with customer requirements (application, coordination of components). Such systems usually consist of a drive unit, one or more cylinders and other components such as hoses, pressure gauges, etc. These are coordinated and optimized with the customer in personal, verbal or written form.
Hydraulic power
More than 1,000 different hydraulic products!
This huge number results from the most varied of applications and product designs. In the field of industrial hydraulics, it is often the case that complete systems are used in accordance with customer requirements (application, coordination of components). Such systems usually consist of a drive unit, one or more cylinders and other components such as hoses, pressure gauges, etc. These are coordinated and optimized with the customer in personal, verbal or written form.
It is important to coordinate the individual components to form a functioning overall system. The customer-specific application can only be successfully implemented if all parts are optimally coordinated.
Subject: hydraulic power
We are your Enerpac authorized dealer base with extensive stock in Austria. High pressure hydraulics - 700 bar / 1,500 / 2,800 bar pressure: The reliability and thus the quality of the tools used play an important role, especially in technically demanding areas of application. In order to meet this requirement, we rely on internationally established and recognized producers of hydraulic tools. Thanks to the Austrian warehouse, our company stands for prompt deliveries for quick customer needs.
Through the cooperation with the company Enerpac as a global supplier of hydraulic solutions, we offer you a range of high quality hydraulic devices for your industrial application. Thanks to the worldwide network of sales offices and technical service centers on every continent, Enerpac is represented all over the world and reaches even the most remote places. PPropertiesicularly valuable for deliveries and assemblies in distant countries.
Classificationsdue to the application (bar)
High pressure hydraulic 700 bar
High pressure hydraulic 700 bar
Wherever heavy loads are safely and hydraulically lifted, shifted, spread, etc. Tonnages 5 to 1,000 tons.
Hydraulic cylinders
The hydraulic cylinders are available in over 100 different versions. Whatever type of application - lifting, pushing, pulling, holding, bending, etc. and whatever size, power, stroke length or type of model you need - single or double-acting, with full, hollow piston or expanding cylinder - there is a cylinder for everyone Purpose.
Hydraulic cylinders RC series
Multipurpose cylinders RC series
Single-acting, tonnage 5-95t, stroke 16-362mm, use in all positions.
Multipurpose cylinders made of aluminium RAC series
Over 1,000 different configurations of hydraulic drive units, including manual pumps (hand / foot operated), battery operated pumps, compressed air operated pumps and electrically operated pumps.
Electric pumps ZE series
Battery pump ZC model
A high-performance battery pump, the battery capacity is 82V / 4Ah, the oil volume is 6600cm³.
Electric pumps ZE series
Very powerful electric pumps, motor power up to 2.2 kW, variably configurable.
Portable electric pumps PUJ/PUD series
PPropertiesicularly light and easy to carry electric pumps.
Battery hydraulic pumps XC model
PPropertiesicularly light and easy to carry electric pump.
Hand pumps made of steel P series
Complete steel construction, chrome-plated piston, non-venting tank. Compact and robust in rough use.
Light weight hand pumps P series
Weight reduction through nylon tank with built-in safety valve.
Pneumatic 2-pedal foot pump XA
One pedal is for the feed, the other for the retreat, with ATEX certification.
Pneumatic pumps PATG/PAMG series
Operation by foot or hand, with externally adjustable pressure relief valve.
Electric pumps ZE2
Robust and durable industrial motor, easy to maintain, efficient and very quiet (79 dBA).
Electric pumps ZU series
Light, mobile electro-hydraulic pumps, powerful, individually configurable.
Portable electric pump EP model
Fully equipped pump, including pressure gauge and wired remote control.
Hand pump made of aluminium P392AL
Ultralight construction (only 4.3 kg) for easy transport.
Foot pump made of steel P392FP
Both hands are free for work. Steel frame, steel foot pedal.
Pneumatic pumps PA model
Robust, slim design. Pedal with 3 positions, insert horizontally or vertically.
Pneumatic pump ZA4 model
Very high delivery volume, powerful in continuous use, handles for transporting.
Electric pumps SFP series
With divided flow rates, controlled raising and lowering of several points regardless of the load distribution.
Elektric pumps EVOB series
For controlling 4 to 8 lifting points, intuitive user interface for easy configuration.
...
Model
Name
for cylinder
Oil volume cm³
Picture
EP
Electric pumps, portable
single acting. double acting
3,000
EVOB
Electric pump, control of multiple lifting points
single acting. double acting
40,000-250,000
P
Hand pumps made of steel
single acting. double acting
672-7,423
P
Light weight hand pumps
single acting. double acting
327-2,540
P392AL
Hand pump made of alumnium
single acting
820
PA
Pneumatic hydraulic pumps
single acting
589-1,311
PAM
Pneumatic hydraulic pumps
single acting. double acting
2,600-7,600
PAMG
Pneumatic hydraulic pumps
single acting. double acting
2,081-3,770
PATG
Pneumatic hydraulic pumps
single acting. double acting
2,081-3,770
PUD
Electric pumps, portable
single acting
1,900-3,800
PUJ
Electric pumps, portable
single acting. double acting
1,900-3,800
SFP
Electric pumps with splitted flow
single acting. double acting
40,000-150,000
XA
Pneumatic hydraulic pumps with 2-pedal foot control
System components are the perfect addition to cylinders, tools and pumps. Every single one of these components - pressure gauges, fittings, manifolds, hoses, couplers, hydraulic oil - is manufactured according to the highest standards.
Simple, portable tools for lifting. There are a large number of possible lifting operations such as lifting machines, steel girders, plates, etc. The lifting devices can be placed under the load to be lifted from a gap width of only 10 mm.
JH-steel jack with built-in pump
Description
Picture
Lifting jacks with built-in pump JHA (aluminum) / JH (steel) up to 100 tons
Extra flat hydraulic machine lifts up to 16 tons
Wedgie and spread cylinders up to 9 tons spreading force
We offer you hydraulic presses that are designed to ensure years of precise and safe use of effective force in your workshop. The presses are available in a variety of sizes and capacities, from 5 to 200 tons. Our exclusive roll frame construction offers enormous flexibility and ease of use.
Hydraulic presses
Description
Picture
Bench presses: Pressure force 10 to
Workshop presses: Pressure force 25-200 to
Roll frame presses: Pressure force 50-200 to
Arbor presses: Pressure force 5-20 to / C-Clamps: Pressure 10-30 to
Hydraulic power means more than lifting, pulling or pushing loads. The 700 bar hydraulics are also used in other areas: The spreading of objects (e.g. flanges), the hydraulic pulling (e.g. of large wheels), the splitting of nuts (e.g. on railway tracks), aligning or changing flanges, cutting of cables or wires, hydraulic punching of holes, the bending of pipes.
Hydraulic nut splitter
Description
Picture
Pullers (2- or 3-arms / Pulling force to: 10-64 / Range mm: 84-600
Flange alignment tools (size mm: 16-229 / min. bolt hole diameter mm: 16-35,5 / max. spreading force to: 1-9
Mechanical flange face tool (Area mm: 25,4-304,8)
Flange change out tools (max. compressive force to: 10 / max. bolt diameter mm: 38-107 / M 39-100)
Punches (compressive force to: 35 / for structural steel up to 12.7 mm)
Nut splitters (Capacity to: 12-178 / for bolt size M 12-90 / hexagon mm: 19-130)
Bender (Bending inserts inches: 1/2 bis 4)
Cutters (Capacity to: 4-20 / Steel cables mm: 16-31)
Spreaders Enerpac (Capacity to: 8-14 / gap width from 6 mm / max. spreading mm: 80)
Spreaders Equilizer (Capacity to: 20-24 / gap width from 6 mm / max. spreading mm: 103,5)
They are used especially in fixture construction and in production facilities. We offer a wide range of clamping ranges.
Description
Picture
Threaded cylinders (Range to: Single acting 1.7-39.2; double acting 17.2-39.2)
Block cylinders (Range to: Single acting 10.9-273; double acting 11-275)
Swing cylinders (Range to: Single acting 2.1-33.1; double acting 2.2-33.8)
Workholding hydraulic catalog as PDF file (english)
Enerpac E215e
Pretensioning technique 1500 bar
Pretensioning technique 1500 bar
A pretensioning tool or screw pretensioning tool is a tool for the axial pretensioning of screws or threaded bolts. One or more threaded bolts are tightened and pretensioned at the same time. Hydraulic pre-tensioning tools can be installed and used in technical systems on a case-by-case basis or permanently. The pre-tensioning forces are continuously monitored and regulated by means of sensors and a controller. Capacity load: 769 kN to 3,958 Nm, thread ranges from M16 to M105.
Application areas: For complex technical systems such as fundament in construction, wind, gas and steam turbines, steel bridges, wind turbines, marine applications, nuclear power plants.
Description
Picture
Bolt tensioners (thread M 16-105, inch 5/8-4)
High pressure hand pump HTP (oil volume cm³: 2,540)
Electric pump ZUTP-S (oil volume cm³: 4,000)
We would be happy to advise you on the subject of screw pre-tensioning - just call 03172/4755 or write an email to This email address is being protected from spambots. You need JavaScript enabled to view it.
Ultra high pressure hydraulic up to 2800 bar
For test works.
Ultra high pressure hydraulic up to 2800 bar
For test works.
Description
Picture
Ultra high pressure hydraulic hand pump P2282 (oil volume cm³: 983)
Ultra high pressure hydraulic hoses
Hydraulic power catalogs
For download as a PDF file
Main catalog no. 21
Enerpac E330e
Enerpac E415e
...
Main catalog no. 21
Enerpac E330e
Enerpac E415e
...
Main catalog no. 21
Enerpac E330e
Enerpac E415e
Technical documents
Do you need spare parts or CAD files for Enerpac products?
You can find detailed research on spare parts on the Enerpac Website. CAD files (format: STEP / IGES / DXF / DWF) you can find here.
Technical documents
Do you need spare parts or CAD files for Enerpac products?